The 70S is the latest addition to Fujikura's fusion splicer range and has been specifically designed to be more ergonomic, faster and have greater durability than the 60S, reducing splicing time to just seven seconds.
Warning: Last items in stock!
The rugged construction design adds improved reliability by resisting shock, rain and dust, allowing it to withstand a 30 inch drop test. Two of the newest features include an automated wind protector and a tube heater which has been developed for quicker splicing cycles and to reduce the number of operational steps. The unit also includes a high-resolution LCD monitor, powerful Li-ion battery for longer operation time and built in videos for on-the-go training
The Fujikura 70S is a fully robust, core alignment fusion splicer, providing consistent, low loss, splice performance.
The new design streamlines the steps required to complete splices, resulting in greater productivity. 'Configurable automation' features allow you to customise the operation of the machine to best suit your particular splicing technique and process.
A new programmable 'automatic wind protector' closes and begins the splicing process after clamping the fibres in position or pressing the 'set' button. Once the splice is completed, not only is the wind protector opened, but one of the sheath clamps, you decide which, is automatically raised making removal of the fibres fast and easy!
Similarly, the 'clamshell' design of the tube heater clamps the splice protection sleeve and applies heat from both sides which results in a reduced shrink time of just 14 seconds!
• Automated and programmable wind protector
• 14-second automated tube heater
• Fully robust for shock, dust and moisture
• Li-Ion battery with 200 splices/shrinks per charge
• 5 mm cleave length for splice on connector or small package needs
• Sheath clamp or fibre holder operation
• On-board training and support videos
• Internet software upgrades
• Multi-function transit case with integrated workstation
|Applicable type of fibers||SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)
and other single mode fibers including ITU-T G.657 fibers.
|Applicable fiber dimensions||Cladding diameter : 80 to 150µm
Coating diameter : 100 to 1000µm
|Fiber setting and cleaved length||Sheathe clamp A (Standard) : For coating dia. 100µm-1000µm (5 to 16mm cleave)
Sheathe clamp B (option) : For coating dia. 900µm loose tube (5 to 16mm cleave)
Fiber holder (option) : FH-60-250, FH-60-900 (5-13mm cleave)
|Splicing modes||Total 100 modes|
|Typical splice loss||0.02dB with SM, 0.01dB with MM, 0.04dB with DS and 0.04dB with NZDS.|
|Splicing time||Typical 7sec. with SM FAST, 10sec. with SM AUTO and 15sec. with AUTO modes with standard SM(ITU-T G.652).|
|Splice loss estimate||Available|
|Attenuation splice function||Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator.|
|Tube heater / heating time||Built-in tube heater with 30 heating modes. / Typical 14sec with Fujikura FP-03.|
|Applicable protection sleeve||60mm, 40mm and Fujikura FPS01 series.|
|Storage of splice result||splice data : 2000, image data : 100|
|Tension test||1.96 to 2.25N|
|Operating condition||0 to 5,000m above sea level, 0 to 95%RH and -10 to 50 degC and up to 15m/s wind velocity, respectively.|
|Storage condition||0 to 95%RH and -40 to 80 degC respectively. Battery : -20 to 30 degC for long term.|
|Dimensions||146W х159Dх150H [mm] excluding rubber foot.|
|Weight||2.6kg with AC adaptor, 2.8kg with battery BTR-09.|
|Viewing method and display||Two CMOS cameras and 4.73" color LCD monitor.|
|Fiber view and magnification||X / Y (320X magnification), or both X and Y simultaneously (200X magnification).|
|Power supply||Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-18. 14.8V DC with BTR-09.|
|No.of splice cycles with battery||Typical 200 cycles (splice / tube heat) with BTR-09.|
|Electrode life||3000 arc-discharges|
|Terminals||USB2.0(Mini-B) connector for PC communication.(slave)
6-pin Mini-DIN connector for HJS power supply.
|Sheath Clamp||CLAMP-S70A (standard)|
|CLAMP-S70B (900µm loose tube)|
|DC power code||DCC-12|
|Primary Coat Stripper||PS-02|
|Battery Recharge Cord||DCC-18|
|Hot Jacket Stripper||HJS-02|
|HJS-03 (battery type)|
|DC Power Cord||DCC-11|
|Fiber Protection Sleeve||FP-03|
|Fujikura FPS01 series.|
No customer reviews for the moment.