The sizeable, large battery capacity at full charge allows for up to 350 splices. Amazingly, the IFS-10 splicer is the most reliable and user friendly Core Alignment splicer in the world.
Warning: Last items in stock!
INNO Fiber Master IFS-10 Core-Alignment Fusion Splicer with the New DACAS (Digital Analysis Core Alignment System) is one of the most dependable splicers on the market. The Fiber Master splicer features a rubberized design for field use in harsh weather conditions. The IFS-10 has a friendly, intuitive GUI (Graphical user Interface) with a 5 inch color LCD screen that is easy to see and is adjustable for front and rear splicer orientation. The sizeable, large battery capacity at full charge allows for up to 350 splices. Amazingly, the IFS-10 splicer is the most reliable and user friendly Core Alignment splicer in the world.
Typically 350 cycles
IFS-10 serves over 350 cycles of splicing. The battery capacity is 9800mAH with the highest level in ARC fusion splicer equipment. Also, the battery life will be demonstrated via 5 stage of battery indicator.
Easy exchange of electrodes
The electrode does not require using screw driver. It can simply remove and replace with one’s hand. Replacement procedure is following;Loosen screw located on electrode cover-->take electrode out of electrode cover (Electrode is fitted in electrode cover).
Easy to clean the mirror
Anti-fog treated mirror is included in IFS-10. It does not require cleaning the mirror as replacement any parts. Easy maintenance of mirror gives better splicing results.
Heating oven with a zoom window
After splicing, it is clear to figure out sleeve processing. IFS-10 heat oven has a magnifying glass. Users can easily check the sleeve via magnifying glass window.
Bright LED for dark environment
LED light is enough bright to work in dark place. Users can find out thin optical fiber during working in dark environment.
Independent clamp motion
Both clamps are independent to adjust each other. If the clamp needs to be replaced, it can change one clamp not both.
Keypad is illuminated brightly so that each button can be figured out in dark working environment. Also pressing usage time is more than 1 million times.
Changeable holder for multi-functional splicing
Both side holders can be replaced easily with screwed driver. Users are available to use a variety of fiber for their needs
IFS-10 monitor is protected by tempered glass LCD. Core image is clearly showed with 5” LCD monitor
|Splicing Method||Core alignment (DACAS:Digital Analysis Core Alignment System)|
|Average Loss||SM(0.02dB) | MM(0.01dB) | DS(0.04dB) | NZDS(0.04dB)|
|Return loss||>> 60 dB|
|Splice Time||9s average SM | 7s SM Quick Mode|
|Pull Test||1.96~2.25N (standard)|
|Electrode Lifespan||> 2,500 arcs|
|Applicable Fiber||SM(ITU-TU.652), MM(ITU-TU.651), DS(ITU-T G.653),NZDS(ITU-T G.655), G657A, G657B|
|Cleaved Length||Coating diameter < 0.25mm = 8-16mm, Coating diameter > 0.25mm = 16mm minimum|
|Heating Programs||Preset 10 heating modes|
|Heating Time||FP-03 typical heating time 30s|
|Protection Sleeve||60mm, 40mm|
|Data Output||USB master device and COM|
|Splice Programs||100 user mode|
|Splice Memory||Up to 2000 records|
|Battery||Typical full cycle 350 Splice and Heat|
|Power Supply||AC 100-240V input or DC 10-15V|
|Monitor||Color 5" LCD monitor, with tempered glass|
|Cameras||2 CCD camera system|
|Magnification||XY style: 150 power, X/Y: 300 power|
|Fiber Display||X/Y or XY, single X.Y|
|Weight||2.2KG (without battery)|
|Size||155 x 130 x 143mm (excluding rubber bumper)|
|Wind Protection||The max wind speed 15m/s|
|Operating Environment||Elevation 0-5000 meters, -10~50°c, ~95% relative humidity|
|Storage Condition||Temperature -40 to 80°c, ~95% relative humidity|
|High Precision Cleaver||VF-78||1|
|AC Adapter/Battery Charger||JS-126300-X||1|
|Cigarette Lighter Cable||CJ-11||1|
No customer reviews for the moment.