The revolutionary 12S compress field proven fixed v-groove and dual axis observation system into a palm size package. Weighing only 776g and low profile design with a maximum thickness of 57mm, it is truly the world's smallest and lightest splicer.
Warning: Last items in stock!
The contour is specially designed for splicing fibers in narrow space environment commonly faced by FTTH installers. The light weight is also highly suitable for aerial cable installation. Furthermore, the 12S is also equipped with powerful Li-ion battery and "Ready-to-Splice" work table to deliver superior performance and productivity in FTTx installation.
|Applicable fibers||Single / SMF(G.652/657), MMF(G.651), DSF(G.653), NZDSF(G.655)|
|Cladding dia./ Sheathe dia.||125μm to 3mm by fiber holder system|
|Cleave length||5mm to 13mm|
|Splice mode / heating mode||Total 100 splice modes / 30 heating modes|
|Typical splice loss||0.05dB (SM), 0.02dB(MM), 0.08dB(DS) and 0.08dB(NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
|Splice time / tube heating time||Typical 15sec with SM
Typical 30sec with FP-03(60mm) sleeve
|Splice result storage||Last 2000 splices|
|Viewing methods / magnification||2 axis 2CMOS camera with 4.47" color LCD. 100X magnification.|
|Tension test||1.96 to 2.25N|
|Applicable protection sleeve||60mm, 40mm and Fujikura micro sleeves|
|No. of splice / heating per battery full charge||Typical 100 cycles with BTR-10(Lithium battery)|
|Electrode life||3000 splices|
|Size / weight||121W x 162D x 57H mm / 776g(including battery)|
|Operating condition||Altitude : 0 to 3,660m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Hμmidity : 0 to 95%RH, non-dew
|Other features||PC software upgrade / data management|
|Resistance features||Shock resistance : 76cm (30inch) bottom surface drop*1|
|Dust resistance : Exposure to dust( 0.1 to 500μm dia. Alumina Silicate).*1|
|Rain resistance : H=10mm/hr for 10min*1|
|With BTR-10 and ELCT2-12|
|AC power cord||ACC-XX||1pc.|
|Quick reference guide||M-12S-E||1pc.|
|Fiber holder||FH-60-250(coating dia. of 250μm)|
|FH-60-900(coating dia. of 900μm)|
|FH-60-DC250(coating dia. of 250μm in drop cable)|
|FH-FC-20(coating dia. of 900μm in 2.0mm Sheathe code)|
|FH-FC-30(coating dia. of 900μm in 3.0mm Sheathe code)|
|FH-60-LT900(900μm dia. loose buffer fiber)|
|High precision fiber cleaver||CT-30 series (for single to 12 ribbon fibers)|
|High precision single fiber cleaver||CT-05(for single fiber)|
|Primary coat stripper||PS-02|
|Nylon jacket stripper||JS-01|
|Protection sleeve||FP-03 / 03 (L=40) and FPS01series|
No customer reviews for the moment.