The FSM-80S is core-to-core alignment single fiber splicer,which is designed for splicing single-count optical fiber for telecommunication use.Shock resistance, dust resistance, and rain resistance.
Warning: Last items in stock!
The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for
quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor, and "built-in operation manuals" in various languages. Market is from backbone network installation to opto-electronics components production for quality splice.
Those features maximize productivity and operatability in splicing at the field.
Automated Wind-protector / Tube Heater
Reduced splicing steps, and the world's fastest splicing / heating times.
Innovative Carrying Case Design
A detachable built-in working table is inside for quick start of splicing
The world's first 6-direction drop proof, dust and water resistant.
Wide Color LCD Monitor
High resolution 4.7 inch monitor with better visibility under daylight.
Powerful Li-ion Battery
200 splice and heating cycles per full charge.
Manuals including operation, troubleshooting and others are available through
|Applicable fibres||SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others|
|Cladding diameter||80 to 150μm|
|Coating diameter||100 to 1000μm|
|Fibre cleaved length||5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900|
|Actual average splice loss||0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS|
|Splice time||7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode|
|Return loss||60dB or greater|
|Splicing modes||100 splicer modes are available|
|Splice loss estimate||Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate|
|Attenuation splice function||Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator|
|Storage of splice result||The last 2000 results to be stored in the internal memory|
|Magnification||X / Y (300X magnification), or both X and Y simultaneously (160X magnification)|
|Viewing method||By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor|
|Tension test||1.96 to 2.25N|
|Operating condition||0-5000m above sea level, 0-95% RH and -10 to 50°C respectively|
|Tube heater||Built-in auto-start tube heater with 10 heating modes and up to 20 for reference|
|Tube heat time||13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available|
|Applicable protection sleeve length||60mm, 40mm and a series of micro sleeves|
|No. of splice/heating with battery||200 times of splicing and heat shrinking under with BTR-09|
|Power supply||Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09|
|Terminals||USB2.0 ( Mini-B) for data and video signal transfer to PC|
|Wind protection||Up to 15m/s wind velocity|
146(W) x 159(D) x 150(H) mm
|Weight||2.5 kg, with ADC-18 AC adaptor
2.7 kg, with BTR-09 battery
|Electrode life||3000 arc-discharges|
|1||Fusion Splicer||FSM-80S with CLAMP-S70A||1 pc|
|2||AC adaptor/battery charger||ADC-18||1 pc|
|3||AC power cord||ACC-XX||1 pc|
|4||Spare Electrodes||ELCT2-20A||1 pair|
|6||Battery Pack||BTR-09||1 pc|
|7||USB cable||USB-01||1 pc|
|8||Quick reference guide||M-80S/19S-E||1 pc|
|9||Warning and cautions||W-70-E||1 pc|
|10||Instruction Manual||M-70||1 pc|
|11||Alcohol Pot||AP-01||1 pc|
|12||Battery charge cord||DCC-18||1 pc|
|13||Carrying Case||CC-30||1 pc|
|14||Screw Driver||SD-01||1 pc|
|Fiber holder||FH-60-250||For 250um coating|
|FH-60-900||For 900um coating|
|FH-60-LT900||For 900um Loose Tube Fiber|
|FH-60-DC250||For Drop Cable|
|FH-60-IDC250||For Indoor Cable|
|FH-FC-20/30||For 2mm/3mm cord|
|Sheath clamp||CLAMP-S70A||Coating diameter from 100um to 1000um|
|(5mm to 16mm cleave)|
|Included in standard package|
|CLAMP-S70B||900um diameter loose tube fiber (16mm cleave)|
|DC power cord||DCC-12||For ADC-11/ADC-13/ADC-18|
|Cigarette lighter socket type|
|DCC-12||For ADC-11/ADC-13/ADC-18, Alligator clamp type|
|Primary Coat Stripper||PS-02||For single 250um fiber|
|Hot Jacket Stripper||HJS-02||Standard|
No customer reviews for the moment.